What to Do After a Chimney Fire

Chimney Safety

What to Do After a Chimney Fire

A chimney fire — even a small one — is a serious event. Here is exactly what to do in the hours and days after, and why using the fireplace again before an inspection is never safe.

A
Aspen Chimney Service
••6 min read
What to Do After a Chimney Fire

A chimney fire is not always the dramatic, roaring event people imagine. Some chimney fires burn slowly and quietly inside the flue, with no visible flames and only a faint crackling sound or a slight smell of something burning. Others are loud, violent events with flames shooting from the chimney top and a sound like a freight train.

Either way, the steps you take immediately after matter enormously — for your safety, your home, and your insurance claim.

Step 1: Get Everyone Out and Call 911

If you suspect a chimney fire is actively burning, get everyone out of the house immediately and call 911. Do not try to fight it yourself. Do not wait to see if it burns itself out.

A chimney fire can reach temperatures exceeding 2,000°F. At that temperature, flue tiles crack, mortar joints fail, and the fire can spread to the wooden framing surrounding the chimney in minutes. What starts as a chimney fire can become a house fire faster than most people expect.

Let the fire department assess the situation. They have thermal imaging equipment that can detect heat in walls and ceilings that is not visible to the naked eye.

Step 2: Stop Using the Fireplace — Completely

Once the immediate emergency is resolved, the fireplace is off-limits. Do not use it again until a professional inspection has been completed and any required repairs have been made.

This applies even if the chimney fire seemed minor. Even a small chimney fire can crack flue tiles throughout the entire liner — not just in the area where the fire was most intense. A cracked liner allows heat and combustion gases to escape into the chimney structure, creating a fire hazard and a carbon monoxide risk with every subsequent use.

There is no visual check you can do from the firebox that will tell you whether the liner is intact. You need a camera inspection.

Step 3: Call a Certified Chimney Professional

After a chimney fire, NFPA 211 — the standard that governs chimneys and venting systems — requires a Level 2 chimney inspection before the fireplace is used again. This is not optional, and it is not something a standard home inspector can perform.

A Level 2 inspection includes a full video camera scan of the flue from top to bottom, documenting the condition of the liner, any cracks or deterioration, and any structural damage to the chimney. It also includes a thorough inspection of the chimney exterior — the crown, the cap, the flashing, and the masonry — for signs of heat damage.

At Aspen Chimney Service, we provide written inspection reports with photographs and video documentation. This report is what your insurance company will need to process a claim.

Step 4: Document Everything for Insurance

Before any cleanup or repairs begin, document the damage thoroughly:

  • Photograph the firebox — any visible damage to the firebox walls, damper, or smoke shelf
  • Photograph the chimney exterior — from the ground, document any visible damage to the crown, cap, or masonry
  • Keep the fire department report — if the fire department responded, get a copy of their report
  • Do not discard anything — damaged components may need to be inspected by an insurance adjuster

Contact your homeowner's insurance company promptly. Most policies cover chimney fire damage, but the claims process requires documentation. A professional inspection report from a certified chimney sweep is typically required.

Step 5: Understand What Repairs May Be Needed

The most common repair required after a chimney fire is relining — replacing the damaged flue liner with a new stainless steel liner. Depending on the severity of the fire, additional repairs may include:

  • Chimney crown repair or replacement — the crown can crack from the heat
  • Masonry repair — mortar joints and brickwork can be damaged by the extreme temperatures
  • Chimney cap replacement — caps are often damaged or destroyed in severe chimney fires
  • Smoke chamber repair — the smoke chamber above the firebox can be damaged

In severe cases, the chimney may need to be partially or fully rebuilt. This is less common but does occur when a chimney fire has been particularly intense or has gone undetected for an extended period.

How to Know If You Had a Chimney Fire

Many chimney fires go unnoticed — particularly the slow-burning variety. Signs that a chimney fire may have occurred include:

  • Puffy, gray, honeycomb-textured creosote on the flue walls (visible from the firebox with a flashlight)
  • Warped or discolored metal components — the damper, the chimney cap, or the flashing
  • Cracked or collapsed flue tiles visible from the firebox opening
  • Smoke or heat smell coming from walls near the chimney
  • Discoloration on the chimney exterior — black streaking or scorching on the masonry above the roofline

If you see any of these signs, treat it as a confirmed chimney fire and schedule a Level 2 inspection before using the fireplace again.

Prevention Is Always Better

Chimney fires are almost entirely preventable. The primary cause is creosote buildup — and creosote buildup is controlled through annual cleaning and proper burning practices.

If you burn wood, have your chimney cleaned every year. Burn only dry, seasoned hardwood. Keep fires burning hot and bright rather than smoldering. These three habits eliminate the conditions that allow chimney fires to occur.

For the full explanation of creosote and how it leads to chimney fires, see our guide: What is creosote and why is it dangerous?

We Respond Quickly After Chimney Fires

Aspen Chimney Service understands that a chimney fire is an urgent situation. We prioritize post-fire inspections and can typically schedule within 24–48 hours of your call.

We serve all of Bucks County — Levittown, Langhorne, Bristol, Yardley, Newtown, Morrisville, Doylestown, Warminster, Horsham, Hatboro, and surrounding communities. Seven days a week, 8 AM to 8 PM.

Call (215) 771-5034 or contact us online.

Related reading: What is creosote and why is it dangerous? · What does a Level 2 chimney inspection include? · Chimney liner repair vs. replacement

Explore Topics

#chimney fire#chimney safety#emergency#Level 2 inspection#Bucks County#chimney repair
A

Written by

Aspen Chimney Service

Content creator and writer sharing insights and stories.

Ready to Book?

Chimney Sweep Near You in Bucks County

Aspen Chimney Service has served Bucks County homeowners since 1995. Flat $150 rate, open 7 days a week, 8 AM–8 PM.

Or call us directly: (215) 771-5034